ONGC INTERVIEW EXPERIENCE-2

ONGC AEE Production Interview experience

1. Introduction in brief.
2. Tum MP se ho na? ONGC ka koi activity hua hai state me?
3. Difference between CNG & LNG?
4. Where do we use CNG? Biggest Company which is involved in LNG business?
5. What is LPG? It's constituents? What is its calorific value?
6. Difference between pipe & tube?
7. What is tolerance?
8. Difference between Welding & Brazing?
9. Training kha se kiye ho?
10. Kitna duration tha?
11. Steam Turbine ke type batao?
12. Kitna stage hota hai? (HP, IP, LP) ? Efficiency kitna tha?
13. Condenser me cooling kaise hota hai?
14. Kaunsa cooling tower hai? Type batao?
15. Kaunsa process hota hai cooling tower me?

Interview was purely technical and no general awareness and HR questions were asked!!
Duration 12 minutes.

Here is my ONGC Interview details
Post applied- AEE(Drilling)
AIR- 412
Interview date- 27/05/2017

1. Apka shubh naam.
2. Aap kahan se ho.
3. Education kahan se ki.
4. Btech me kya position thi- I said 6th.
5. Gate rank kitna hai.
6. Gate rank itna kam kyu.
7. Then they asked which type of questions would I first prefer to answer- HR or Technical ??
8. They asked for my strength and weakness- no counter question to my answer
9. Then asked why ONGC??
10. Other member from the panel asked a question of mathematics because  I had mention about my gold medal in Maths Olympiad.
11. Then they asked for my fav subjct- I said SOM
12- Basic questions from SOM like Young's Modulus, stress strain curve was asked.
13- What are different types of friction, what is friction welding.
14- Types of heat exchanger because my project was based on heat exchanger, different types of turbines.
15- Different types of pumps, which type of pump should be used for drilling purpose in sea.
16- What do you know about ONGC ?
Panel was very friendly,
They were asking questions in hindi only.
Panel consisted of 7 members - 6 male, 1 female.
Female member asked only one HR related question.

IOCL INTERVIEW EXPERIENCE -2

I would like to share my IOCL Interview Experience.
My GATE rank is 650.

I am from Mechanical background. Interview was in mumbai on 1st June.
First, the interview was conducted for some candidates.
They asked me following questions:
Are ready to leave your hometown?
Did you do any coaching?
Tell us something you haven't written on your CV?
Family background?
Will you be willing to work in any location? They asked me questions on industrial training only, not from my project.

Technical questions were asked from Material Science: Stainless steel, iron carbon diagram.

Panel consisted of 5 members.
Then GD and GT was conducted.
Enough time was given to speak. (25min. For GD and GT)

GD: Discipline and National character differentiates us from first world countries.

GT: How to make higher education in India more inclusive.
_____________________________________________

IOCL Interview 14/06/ 2017 Mechanical (AIR 16)

Interview :
Q1. Where are you from
(I am from Pataudi ; so discussed about Saif Ali khan )
Q2. Have you attended his marriage ?
Q3. Tell us about family
Q4. Why did you left BLUE STAR ?
Q5. Given a question and asked to find COP of system.
Q6. What are the various refrigerants used in RAC ?
Q7. Defination of 1 TR refrigeration.
Q8. Whats are types of welding ?
Q9. What are defects in welding ?
Q10. Explain nomenclature of electrode.
(They now offered a glass of lassi ; about 0.5 litre
I drank it in one shot
They started smiling and said *ye pakka haryana ka desi baccha hai*)
Q11. Which IOCl refinery is there in Haryana ?
Q12. Name some refineries of IOCL ?
Q13. What is surface tension ?
Q14. Do you have any department or location preferences ?
I answered all questions Panel was in good mood

GD topic : It is not always hardwork that take you to success rather destiny plays role in it.
GT topic : To promote indian culture , traditional music and art what will be your strategy.

ONGC INTEVIEW EXPERIENCE

ONGC Mechanical Interview experience, 15th June 2017 

1. Name and place?
2. Can you describe Madhya Pradesh in 5 sentences?
3. Why farmers are protesting in MP? They explained one reason and asked to explain other reasons.
4. Can u name different type of valves used in oil industries.?
5.what type of job you will be assigned in ONGC?
6. Different type of maintanance.?
7. What parameters need to be controlled in maintanance?
8. Types of vibrations?
9. Name some vibration and noise monitoring systems?
10. Two recent national level news?
11. One advancement in automobile is the gearless car, what is next advancement?

ONGC AEE CEMENTING 05-06-2017

There were 5 persons 4 gents and 1 lady in the panel
General questions -
First, mam started asking questions.
When did you completed your B Tech ?
Tell me about your family background.
Why ONGC?
Do you have idea of what kind of work you will be given ?
Few more similar questions then she moved on to other Sir and told him to ask technical questions.

Technical :
Zeroth law of thermodynamics.
Difference between tube and pipe.
Springs, Forging.
Which important factor to be considered while forging a material ?
About CNC i.e. about CNC Machine. Company which manufactured that machine *( as I did short course on CNC milling).
What type of spring is used in railway coaches ?
He asked - Suppose the door of refrigerator is kept open in the room then what will happen and why ?

Now came the HR question from the second interviewer.
He seemed to be some senior member of the company.
He wanted me to put my views about the huge population of India, what are the advantages and disadvantages.
He then asked me to focus on two areas that you think will resolve those disadvantages.
What govt. is doing in these areas ?

Interview lasted for 10 to 15 minutes and questions were similar to everyone.
They also asked about radioactivity and few areas of I.C. Engines to some of my friends.

IOCL INTERVIEW EXPERIENCE

IOCL Interview Experience of selected students based on GATE 2017 score.

I was interviewed at IOCL's IIPM (IndianOil Institute of Petroleum Management) Gurgaon on 19th June, 2017.

GD Choices-
1. The state of Indian Engineering Education scene due to opening of way too many colleges.
2. Should 0% Interest loans be provided to Farmers in today's times of farmer unrest.

GT (Group Task) - 

Only two IITs have made it to the Top 200 rankings of World's Best Institutes. As directors of various IITs, find a solution to make sure that not just two but many more IITs could crack the Top 100 rankings.

The GD/GT Panel seemed uninterested, hardly even looking at which candidate is even speaking at GD. Payed a little more attention during GT to notice if we were interacting or not.

Interview- 

Panel consisted of Five Members-
1. Tell me about yourself.
According to my answer from there-
2. What you did after job ?
3. Would it not have been possible to do along with job ?
4. Best achievement while being at job ?
5. Describe in detail the CSR activity you mentioned.
( because of my job at Automobile Company ).
6. BS-3, BS-4, BS-6 Changes in fuel and changes in vehicles design.
7. Is Indian automobile market ready for them?
8. Crankshaft Material and manufacturing and why exactly?
9. CRDI and it's effect for a common man.
10. Welding Vs Brazing.
11. Bearings in IC engine.
12. Give brief description about IOCL major businesses.
13. Do you know how many refineries we have?
14. What is our petrochemical brand name and it's products?

The panel was very senior and yet very very humble and friendly.
They listened to each and every answer with at most attention, allowed me to answer with however much time I needed and placed counter questions only after I had finished my part.

After answering over dozen of questions over half an hour, the most senior of them, asked if anyone wants to ask any more (in a comic way) and we all laughed.

Finally, HR mam asked last question-
15. Which was the gas responsible for Bhopal Gas Tragedy and the company name? (because of my college was in Bhopal).

With the final answer, I was allowed to leave.

IOCL Interview Feedback

Interview happened at IIPM Gurgaon.

GD- Should death plenty be banned or not ?

GT- U have to promote Pradhan Mantri Ujvala Yojna in remote areas of our country and for this list the problems you may face during this project and u will rectify them.

Interview- 4 members total.

1. Tell me about yourself which is not written in these forms in front of me.
2. What is coefficient of restitution.
3. What is Black hole ?
4. What is black body ?
5. What is differential and what is its purpose. Do we have 2 differential in 4 wheel drive.
6. What is blanking ?
7. What is the efficiency of a thread? what is the efficiency of screw jack?
8. What is coupling and what it is used for and list some of its examples.
9. What is camber
10. Let you are shift in-charge at your shop floor and some contractor worker slapped on permanent worker and due to this all the permanent workers went outside the factory and decided not to work. What you will do in this situation?

By reading all this you might think that I told them automobile or physics is my area of interest but trust me neither I had written in my CV nor I told them regarding this.I don't know why they were so much focused on automobile.

Actually they have a set of questions written on a page and they will ask you from those papers only unless you have some work experience.
So prepare your mind as they can ask you anything,even out of your domain.

Anyways best of luck !!

WHICH TEST SERIES TO JOIN..??

Are you confused about which classes test series to join?

Which test series would be best to analyse my level of preparation ??

How many test series to join ??

Test series play an essential role in your preparation be it GATE or any competitive exam.

It is one of the strategical aspect of your preparation that can create a difference if used with a seriousness attitude and proper planning. 

On what basis should we decide?

1. Level of questions : Questions level should be in accordance to the difficulty level of Gate Exam.

and should cover all the concepts of that particular  subject.

2. Analysis of Test Report : It should provide detailed analysis report  so that you can check and compare your preparation level, identify your weak areas and work towards perfecting them.

3. Video Solutions or in detailed solutions of difficult and conceptual problems.

Lists of Test Series:

1. Made Easy Test Series          https://onlinetestseriesmadeeasy.in/GATE2019/Mechanical-Engineering-ME

                                                  https://onlinetestseriesmadeeasy.in/GATE2019/subject-wise-test-full-syllabus-tests

2. Ace Academy Test Series     http://www.aceenggacademy.com/gate-2019-ace-online-test-series/

3. GateForum Test Series          http://gateforum.com/ot-course/ 

4. The GateAcademy Test Series http://thegateacademy.com/gate-online-mock-test-series

5. Exergic Test Series           https://exergic.in/gate-test-series/

6. Vani Institute Test Series  https://www.aspirebuzz.com/vaniinstitute/gate-preparation-online-for-me

7. Testbook.com Test Series https://testbook.com/gate-me

8. IES Master Test Series      https://iesmaster.org/testseries/

9. Ignited Engineers Test Series    http://onlinetestseries.ignitedengineers.com/test-schedule/gate/mechanical-engineering/ 

10. Gradeup Test Series   (will release its 2019 test series notification soon)

Made Easy Test Series :

1. Preferred by majority of students all over India, so you can judge where you stand among the crowd.

 2. Contains good conceptual questions along with video solutions to difficult problems.

 3. Systematic analysis report is generated to identify weak areas.

 4. Few questions are repeated from previous year test series questions.

 5. Test Series consist of Two parts- Basic and Advanced.

    The basic one is in par with the Gate level whereas Advanced level is little bit on the higher side        containing lenthy problems but overall good for concept building.

 6. Its Gate Mock Tests are in level with the Gate Standards.

 7. Good User Interface.

Suggestion : Attend a Demo Mock Test and then decide. 

Ace Academy Test Series:

1. Contains too conceptual and few tough questions which is overall good for concept building..

2. Video solution for every problems.

3. Detailed Analysis is provided at the end of every tests.

4. Number of tests and questions are more so one can get lots of questions for practice.

5. Good User Interface.

Exergic Test Series:

1. Founded by Chandresh Mahajan Sir, who secured an AIR-37 in GATE-14 and is Ex-IOCLian.

2. Highly conceptual questions are provided along with its purpose in separate report at the end of          every test.

3. Number of tests are less but with good quality questions along with detailed analysis.

4. Report contains the importance of the questions added and what one  can learn from it.

Suggestion : Attend a Demo Mock Test and then decide.

Testbook.com Test Series:

1. Number of tests and questions in it are more, so one get lots of questions for practice.

2. Contains few irrelevant and lengthy questions.

3. Available at cheap price.

4. Good user interface and in much detail analysis report is presented.

Suggestion : Attend a Demo Mock Test and then decide.

These comparison is based on my personal experience.

I had enrolled for only two test series i.e Made Easy and Testbook.com 

Also my friends allowed me use their few tests of Ace Academy and Exergic test series.

How many test series to join?

          Joining one good test series and attempting it proper planning is enough to practice and analyse your preparation. Managing two test series is quite a cumbersome task as you have arrange your preparation schedule according to tests schedule of both test series but eventually it will be help you if completed diligently. Here's the link to get an idea about the level of Made Easy, Ace Academy and GateForum test series questions..

https://gateflow.blogspot.in/2018/05/gate-test-series.html

I have also attached links of respective test series in front of their names in the Test series list. Visit them and get to know about their schedule, what all they are offering at what cost?

In case of any doubt, do comment.

And share it among your friends as they will also get benefited.  

HOW TO PREPARE

GATE exam questions aren't like  typical subjective questions of  your college exams instead they are objective type and application oriented.

Before you start any subject for e.g. Strength of Material (SOM) first go through its GATE syllabus and then have a glace at the previous year Gate questions asked from this subject.
Try to solve some questions and check how much hold you have on your concepts and ascertain your level. Never try to mug up any topic instead learn the concept behind it which is very essential for problem solving approach.

For concept building refer standard books of good authors and don't rely on local authors book that you had referred during your college days.
You can also refer Hand written notes of MADE EASY Classes as it contains all the necessary content as per GATE syllabus.
Give your 1st preference to Standard Reference books if you have got ample time for your preparation (especially 2nd Year Students).
Now , once you're done with all the concepts of SOM again try solving previous year GATE questions on it. 
Try to solve more than 70% previous year questions accurately as it will increase your self confidence and practice more questions to improve your accuracy.
I am attaching here the link of Test Series from where you can practice more Gate oriented questions to improve your accuracy.
Here's the link to download Test Series question

https://gateflow.blogspot.in/2018/05/gate-test-series.html

If you're not able to solve sums then analyse where you went wrong,identify the type of mistakes you are doing whether it is a conceptual mistake or a silly mistake and try to rectify it and always read questions properly and take your time to understand it.
In this way you can master one subject and repeat the same procedure for another subjects too.

Here's the list of standard reference book and study material that one should follow:
TOM : S.S.Rattan
SOM : B.C.Punamia, Sadhu Singh
Engineering Mechanics : A.K.Tayal, Timoshenko
Heat transfer : P.K.Nag, J.P.Holman, R.C.Sachdeva
Thermodynamics : P.K.Nag (solve all solved examples and read theory)
Fluid Mechanics : R.K.Bansal, S.K.Som
Industrial Engineering : Made Easy Handwritten Notes, Hira Gupta
Production : Kalpakijan, Amitabh Ghosh and Malik
Material Science : Kodgire, William Callister
Machine Design : V.B.Bhandari
Mathematics : B.S.Grewal, Erwin Kreyszig
RAC : P.K.Nag,Made Easy Handwritten Notes

Also refer Hand written notes of Made Easy for shortcut tricks and tips 

Remember guys ,GATE exam is all about concept building and accuracy.
Practice lots of problems on virtual calculator and get handy with it to improve your 
accuracy.
To install GATE Virtual Calculator
Click here ( For Mobile Version)
Click here  ( For Desktop Version)


Do share it among your friends if you found it useful.
In case of any query, Comment!!

KNOW YOUR SYLLABUS

Blindly starting with the GATE preparation won't help you to achieve a good Rank and you may end up cursing yourself for wasting so much  of time reading unnecessary stuffs.
Before you kick-off for your preparation you should know in detail the prescribed GATE syllabus as per your Branch.

I am attaching herewith the syllabus for Mechanical Branch for GATE 2019 (The syllabus for GATE 2019 isn't released yet but it is same since last 5 years)

To Download the syllabus Click on Download button

Section 1: Engineering Mathematics

Linear Algebra: Matrix algebra, systems of linear equations, eigenvalues and 
eigen vectors.
Calculus: Functions of single variable, limit, continuity and differentiability, mean 
value theorems, indeterminate forms; evaluation of definite and improper integrals; 
double and triple integrals; partial derivatives, total derivative, Taylor series (in one 
and two variables), maxima and minima, Fourier series; gradient, divergence and 
curl, vector identities, directional derivatives, line, surface and volume integrals, 
applications of Gauss, Stokes and Green’s theorems.
Differential equations: First order equations (linear and nonlinear); higher order linear 
differential equations with constant coefficients; Euler-Cauchy equation; initial and 
boundary value problems; Laplace transforms; solutions of heat, wave and 
Laplace's equations.
Complex variables: Analytic functions; Cauchy-Riemann equations; Cauchy’s 
integral theorem and integral formula; Taylor and Laurent series.
Probability and Statistics: Definitions of probability, sampling theorems, conditional 
probability; mean, median, mode and standard deviation; random variables, 
binomial, Poisson and normal distributions.
Numerical Methods: Numerical solutions of linear and non-linear algebraic 
equations; integration by trapezoidal and Simpson’s rules; single and multi-step 
methods for differential equations.

Section 2: Applied Mechanics and Design

Engineering Mechanics: Free-body diagrams and equilibrium; trusses and frames; 
virtual work; kinematics and dynamics of particles and of rigid bodies in plane 
motion; impulse and momentum (linear and angular) and energy formulations, 
collisions.
Mechanics of Materials: Stress and strain, elastic constants, Poisson's ratio; Mohr’s 
circle for plane stress and plane strain; thin cylinders; shear force and bending 
moment diagrams; bending and shear stresses; deflection of beams; torsion of 
circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain 
gauges and rosettes; testing of materials with universal testing machine; testing of 
hardness and impact strength.
Theory of Machines: Displacement, velocity and acceleration analysis of plane 
mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels 
and governors; balancing of reciprocating and rotating masses; gyroscope.
Vibrations: Free and forced vibration of single degree of freedom systems, effect of 
damping; vibration isolation; resonance; critical speeds of shafts.
Machine Design: Design for static and dynamic loading; failure theories; fatigue 
strength and the S-N diagram; principles of the design of machine elements such as 
bolted, riveted and welded joints; shafts, gears, rolling and sliding contact bearings, 
brakes and clutches, springs.

Section 3: Fluid Mechanics and Thermal Sciences

Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy, forces on 
submerged bodies, stability of floating bodies; control-volume analysis of mass, 
momentum and energy; fluid acceleration; differential equations of continuity and 
momentum; Bernoulli’s equation; dimensional analysis; viscous flow of 
incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, 
head losses in pipes, bends and fittings.
Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance 
concept and electrical analogy, heat transfer through fins; unsteady heat 
conduction, lumped parameter system, Heisler's charts; thermal boundary layer, 
dimensionless parameters in free and forced convective heat transfer, heat transfer 
correlations for flow over flat plates and through pipes, effect of turbulence; heat 
exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan-
Boltzmann law, Wien's displacement law, black and grey surfaces, view factors, 
radiation network analysis.
Thermodynamics: Thermodynamic systems and processes; properties of pure 
substances, behaviour of ideal and real gases; zeroth and first laws of 
thermodynamics, calculation of work and heat in various processes; second law of 
thermodynamics; thermodynamic property charts and tables, availability and 
irreversibility; thermodynamic relations.
Applications: Power Engineering: Air and gas compressors; vapour and gas power 
cycles, concepts of regeneration and reheat. I.C. Engines: Air-standard Otto, Diesel 
and dual cycles. Refrigeration and air-conditioning: Vapour and gas refrigeration 
and heat pump cycles; properties of moist air, psychrometric chart, basic 
psychrometric processes. Turbomachinery: Impulse and reaction principles, velocity 
diagrams, Pelton-wheel, Francis and Kaplan turbines.

Section 4: Materials, Manufacturing and Industrial Engineering

Engineering Materials: Structure and properties of engineering materials, phase 
diagrams, heat treatment, stress-strain diagrams for engineering materials.
Casting, Forming and Joining Processes: Different types of castings, design of 
patterns, moulds and cores; solidification and cooling; riser and gating design. 
Plastic deformation and yield criteria; fundamentals of hot and cold working 
processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet 
(shearing, deep drawing, bending) metal forming processes; principles of powder 
metallurgy. Principles of welding, brazing, soldering and adhesive bonding.
Machining and Machine Tool Operations: Mechanics of machining; basic machine 
tools; single and multi-point cutting tools, tool geometry and materials, tool life and 
wear; economics of machining; principles of non-traditional machining processes; 
principles of work holding, design of jigs and fixtures.
Metrology and Inspection: Limits, fits and tolerances; linear and angular 
measurements; comparators; gauge design; interferometry; form and finish 
measurement; alignment and testing methods; tolerance analysis in manufacturing 
and assembly.
Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their 
integration tools.
Production Planning and Control: Forecasting models, aggregate production 
planning, scheduling, materials requirement planning.
Inventory Control: Deterministic models; safety stock inventory control systems.
Operations Research: Linear programming, simplex method, transportation, 
assignment, network flow models, simple queuing models, PERT and CPM.

Go through each and every topic comprehensively and study that much only. From GATE exam perspective it is more important to know WHAT NOT TO READ THAN WHAT TO READ.
If you carefully observe the syllabus of GATE is very concise and made with application point of view.
Regarding " how to prepare and from which  reference books to be used?" I will let you know about it on my next post.
Stay Connected !!

(Do Comment your queries)