IOCL INTERVIEWS 2018


IOCL Interview Mechanical

GD- Privacy of ordinary people are compromised in India

GT-  What would you do to stop misuse of extra privileges given to women.

PI- 
Introduction
What do you like in hindi litrature.
Who was dinkar?
Tell a poem of maithilisharan gupt.
Have you read godan of premchand?
Tell about main characters in godan?
Have you read eedgah?
Poems k alava aur kya padhte ho?
Do you think you get benefited by reading these books?
Bosch me training me kya seekha?
What is a battery, what is internal resistance, what is effective current?
What is an induction motor, how it works?
How will take power from motor to required device?
How many types of couplings are there?
Which coupling will you use for offset shafts?
What is second law of thermodynamics?
What do you mean by COP, which one is better COP 12 or COP 18?
Why psu like iocl not private sector?
What were you doing for last one year?
You should have tried for pvt company, yoy were jobless for one year.
What do you mean by work life balance ?
What would be your reaction if you are not allowed to go hometown for a year or more than that?
To whom you will approach...immediate boss or higher authorities?


-------------------------------------------------------------------------------------------------------------------------


IOCL 10 JULY 2018

GD- Is women empowerment is limited to debates only?

GT- You are a young officer in a PSU and you think you are innovative and new ideas are not heard by senior officers , juniors are also not supporting by thinking that they might be supressed by senior officers in future due to this
So discuss among yoursleves for 10 to 12 min and then arrive at a proper conclusion and somebody conclude it.
4 panelists ( 3M 1F)
HR ( Female panelist)
1. Tell me about yourself.
2. As a person how arer you ? How do you define yourself as a person ?
3. What are your aims and aspirations.

Technical
1. What are different type of threads
2. Different types of positive displacement pump.
3. What is cavitation
4. Where does it occur in centrifugal pump.
5. what is second law of thermodynamic
6. What is entropy
Again HR ( This time male panelist)
1. What do u know about IOCL.
2. Aur kahan kahan interview diya hai.
( I had mention marketing... so ...)
3. What happens in marketing department.
4. Who was your senior that you mentioned before is working in IOCL .
Thanks ..you can go now.

-------------------------------------------------------------------------------------------------------------------------

IOCL Mechanical  Date : 04.07.2018

Interview ( 4M+1F)
1- Tell us about yourself.
2- Why you left your previous job ?
3- Why Public sector why not private sector (lot of cross questions)  ?
4- Positives & negatives of BHEL (Summer training industry) and FAG bearing (Previous employer).
5- Do comparison in terms of productivity.
6- Current year Turnover and Profit of BHEL Jhansi and FAG bearing.
7- What are pressure valve, give some examples of different type of pressure valves
8- If there is high heat build up in gear box, what will you do ?
9- How will you check there is any failure or not since gearbox is completely sealed
( I said, by checking the lubricant temperature then he asked any other parameter)
10- What is 3rd law of termodynamics and its practical application
11- Draw rankine cycle and suggest the methods to increase its efficiency ( I answered, there are total 3 methods : by reducing condenser pressure, by increasing boiler pressure, by superheating of steam in boiler)
12- How superheating is done?
13- How was your work life in previous organisation ?
14 - Why you not prepared while doing private job .
15- What are different business divisions of IOCL .
16 - In which division you would like to work ?

GD: Total 10 students
( 2 min to select the topic among yourself and 10 min to discuss)
1: Mobile should be banned in School campus or not
2: will Artificial intelligence replace the complete manpower requirement in future
GT: Suggest the action points require to eliminate girl's eve teasing and sexual harassment cases in college

IOCL INTERVIEW

IOCL INTERVIEW EXPERIENCE (AIR-1052)

14/06/18
Venue - Mumbai
Reporting time : 8:30 a.m.

We were given some forms in which we had to fill Name, Registration Number, % of marks in Engineering, GPA to % Conversion Formula, etc.
After that, one HR guy came and presented the PPT regarding work culture ,figures and statistics of IOCL and then we proceeded for document verification.
Document verification took around 20 minutes and in between they distributed light breakfast ( Sandwich + Real fruit juice :P ).

GD,GT and PI was being conducted simultaneously.
My PI round came after the lunch  ( which was again provided by IOCL, that too unlimited :P ) at 3.00 p.m.

INTERVIEW :
Panelists : 6 members (all in their late 40s and 50s )

1. Pandey ji, apna ek acha sa introduction dedo hume, regarding your education, family background, your hobbies and Interests.
2. What is your GATE Score and GATE Rank?
3. Are you happy with your Gate AIR ?
4. Why you want to join IOCL ?
5. Apne  College project kay baare mai batao hame.
6. Campus placement hua hai ki nahi ?
7. Tell us what have you learned in your internship training ?
8. Of what materials are Rails made of ?
9. Where they are made in India ?
10. You have done your training in Railways, why don't you join Railways ?
11. Favourite subjects konse hai ?
12. Why do we need compressor in refrigerator ?
13. Why there's need to increase pressure in Refrigeration ?
14. Tell me about the process used for surface Hardening ?
15. How Nitriding is done ?
16. Suppose we want to use steel at very high temperature, what are the alloying elements you will add and why ?
17. Agar aapko kisi remote location pe bhej dia jaaye, toh aap kya karoge ?
18. What are the different sectors  in which IOCL works ?
Interview Duration : 15 minutes.

Immediately after they Interview, coordinators took us for GD,GT round
Number of candidates : 11
Language : Either Hindi or English

GD topic : Should Nationalism be forced ?
Time allowed - 30 mins, 3 mins for jotting down the points , last 2 minutes for conclusion.
We didn't create a fish market and everyone got the chance to speak at least twice.

GT Topic : List down the qualities of a good Team Leader.
Time alloted - 30 minutes.

Considering my Rank I have zero chances to get selected, but overall it was a good Experience.

BHEL INTERVIEW EXPERIENCE 2018

BHEL INTERVIEW 2nd June

6 panelists (1lady)
1. Where are you from ?
2. I said Bokaro, then they asked that why this place is famous ?
3. Tell me at least 4 nearby cities of Bokaro ?
4. What was your responsibility in your previous job ?
5. About Summer Industrial Training ?
6. My training was in Hydel power plant so they asked about the layout of the plant .
7. One or two questions from Training.
8. About Quality Control tools ?
9. How you manage the people ?
10. Gate score and Rank ?
11. Total power capacity of India ?
Excellent management by BHEL.
--------------------------------------------------------------------------------------------------------------------------

Interview Experience BHEL
Branch - Mechanical
Rank - 46

The management was so good that I had to wait only for an hour or so.
The interview was a mix of technical and HR questions.
- You come from IIT Roorkee? Do you belong to Uttarakhand?
- What is your hometown famous for?
- Tell us about your family.
- What is the reason for this two days strike by bankers?
- Tell us about yourself.
- What were the problems faced by the freshers in your college?
- Will you go for higher studies ?
- What are your areas of interest ?
- Tell me about the parts in a power plant ?
- Why there's a negative pressure in the condenser ?
- Would it be okay If you are posted in South ?
- Tell me different types of Welding ?
- What is a shielding gas ?
- If you are posted in south and your seniors start saying stuff like, "Kahan aa gaye yaar tum?", how would you react ?
Duration - 15-20 minutes
The panel was friendly and helping.

--------------------------------------------------------------------------------------------------------------------------

AIR 96 BHEL Interview Mechanical31/05/18

6 Members (2 female)
1. Tell about yourself .
2. Applied for any other PSUs ?
3. What was the case study in BPCL and what you said ?
4. About Training.
5. What if you are posted in South?
6. Annealing ?
7. 2 stroke vs 4 stroke ?
8. Which is used in more power ?
9. How you are compatible with BHEL ?
10. Leaning you got from the extra curricular activity?
They asked about a particular activity.
--------------------------------------------------------------------------------------------------------------------------

31 may 2018 BHEL Interview

Venue-New Delhi
Panel consist of 5 sir 2 mam.

Entered and wished 
1. Meaning of my Name and then,
2. Tell me about yourself ?
3. They were impressed that I was mess secretary in college, so 2-3 min questions on that.
4. Then Project (Just description)
5. Then some questions from Ranchi , Jharkhand as I am from Ranchi.
6. Pilgrim places in Jharkhand ? 
7. Where do you want posting ? 
8. What if you get posted here and there....?
Technical ques:
9. Name devices based on 2nd law of thermodynamics.
10. What is Supercharging, Scavenging ?
11. What is Pump storage plant ?
12. Different units of pressure ?
13. What will happen to room if refrigerator door is kept open ?
At last one mam asked What leadership qualities you have ?
Interview was good.
--------------------------------------------------------------------------------------------------------------------------

BHEL INTERVIEW  MECHANICAL

30 MAY 2018

1. Tell me about yourself.2. Where r you from ? 3. Gate Rank ?4. Gate Score ?5. Did you take coaching ? 6. Why not join business with your family?7. Area of interests?8. Will the Microwave heat a substance that doesn't have water ? 9. What is Scavenging ? 10. Supercharging? 11. Which Engine is more efficient CI or SI ? 12. How the heat is transferred in the boilers? 13. Are you open to any location ? 14. What other PSUs have you applied for ? 15. If you get selected in all which will you join ?16. Questions were not asked from area interest.No questions were asked from Project.A few questions were asked from Summer Internship.There was no cross questioning.
--------------------------------------------------------------------------------------------------------------------------

BHEL Interview

Panel 7 members
Timing 12-15 min
1. Your name.
2. Place.
3. Occupation of family members.
4. Hobbies.
5. Training -I was trained in BHEL, Haridwar so question were like
6. Did you visit there for complete 1 month ? Different units there ? What did you learn or observed ?
7. Have you visited any Powerplant ?
8. Some basic questions on Powerplant like Why high pressure is kept ? Use of pump in 
Powerplant ?
Difference between Thermodynamic and Heat Transfer ?
--------------------------------------------------------------------------------------------------------------------------

BHEL INTERVIEW MECHANICAL

Panel -6 members (2 female members)
Duration-20 mins
1. From which college you have completed your B.Tech ( NIT Surat ).
2. For what things Surat is famous for ? (Diamonds ,Textile , Clean City)
3. Hometown ? (Morena, Madhya Pradesh)
4. Morena is famous for ? (Chambal valley, Daaku or Daket then they laugh loudly and I gave a smile)
5. You have done training from BHEL Bhopal ?
6. What you did there ?
7. Types of machine with specifications?
8. Relate Fluid Mechanics to Hydropower Plant.
9. Relate Thermodynamics with Hydropower Plant.
10. Types of Hardening process.
11. Family background.


ONGC INTERVIEW EXPERIENCE 2018 (DRILLING)

ONGC DRILLING AIR 544 

Panel was of 5 person 4M 1F
After the greetings they offered me to sit.
M1 -
1. Introduce yourself.
2. Which year passout ? What were you doing from last year ?
3. What is Octane number.
4. What is Cetane number.
M2 -
5. Recently why Bishnoi's were in news (as I m Bishnoi)
6. Do you follow Bishnoi's values ? What Bishnoi stands for ?
7. Then questions about project.
M3 -
8. What is CNG and its Composition ?
9. What is LPG ?
10.Types of combustion engine ?
11. Typea of IC Engine ?
12. Emissions of diesel engine and 2 or 3 more questions about these.
13. Diesel engine works on which cycle and how to reduce emissions ?
14. What quality a leader have ? ( strength)

--------------------------------------------------------------------------------------------------------------------------

Rank 46AEE DRILLING 30-05-2018

-Introduce yourself.
-Family background.
-What is Air Dryer ?
-Compressor uses in aircraft ?
-How to increase heat exchanger efficiency ?
-Cashless economy disadvantages and advantages ?
-What government is doing for cashless economy ?
-Advantages and disadvantages of overpopulation ?
-What is biimstec and SAARC ?
-Why you left your previous job ?

--------------------------------------------------------------------------------------------------------------------------

ONGC DRILLING AIR 317

Was 3rd last in the panel.
Reporting time : 11:30 a.m
Interview done at 5.oo p.m. 
1 - Your Place.
2 - Introduction.
3- Family Background ?
4 - Why Gap (2017 Passout)
5- M.Tech or PSU ?
6- Why PSU?
7- Why ONGC in PSUs ?
8- Why Oil sectors hydrocarbon reserve is decreasing ?
9- About Hydrates (I mentioned Hydrates)
10- Asked if I know Hydrates in detail ? I said No
11- About Project.
12- About Vapour Absorption Cycle.
13- Asked about Liquefaction of gases.
14- Critical Temperature of Gases ?
15- Where Commonwealth Games were held and INDIA;s performance in it ?


Will keep on adding and updating it !!
 

EIL INTERVIEW EXPERIENCE

EIL INTERVIEW MECHANICAL

Panel consisted of 5 members (2 Madam and 3 Sir)

1. Tell about yourself.
2. Why you want to join EIL and how you will contribute to EIL.
3. How to increase heat transfer rate from a body. ( I said by increasing surface area)
4. Types of fins and any other method to increase surface area.
5. What you learnt in your training ?
6. What is undercutting and which type of gears to use for heavy loads ?
7. How to test quality of weld ?
8. Are u comfortable If we post you to remote locations ?
Interview durationn was around 30 minutes.

--------------------------------------------------------------------------------------------------------------------------

EIL Interview
30 may (Mechanical)

Q1. What do you know about EIL?
Q2. Tell us about your industrial training?
(Then one of the panel member appreciated my answer and asked like what is the concept involved in your Industrial Training)
Next 3-4 questions related to Theory of Machines as it was related to my Industrial Training.
Then they were like, okay Thank-you !!
(I was not satisfied as it was only a 5 minute interaction)
I said sir/mam there's one more thing I wish to tell.
It's related to my project.
Then next 4-5 questions related to it.
Thats it.
--------------------------------------------------------------------------------------------------------------------------

ENGINEERS INDIA LIMITED ( EIL ) INTERVIEW 2018

DATE : 29/05/2018

Venue: Delhi
Entered and wished them.
They asked me to sit.
1. Meaning of my name ?
2. 8-10 minutes regarding my Project Work.
3. Asked my favourite subjects.
Technical questions : 
4. What is Annealing, Tempering ?
5. Difference between hardness and toughness ?
6. Which value of strength is used for design purpose ?
    Interview was good ...Answered each question...At last they said good luck !!
-------------------------------------------------------------------------------------------------------------------------
Venue : Delhi
Entered and wished them.
They asked me to sit
1. Meaning of my name. (Told the meaning of my name Krishnaveer).
2. Introduce yourself. (Told about my hometown, graduation and project.) 
3. As you have done your training from BHEL Haridwar , tell us about the machine tools used in the Turbine Manufacturing.
4. Machining processes and about the types of turbines.  
5. They made me draw the blade profile on the sheet and then asked about shrouding of blades
6. Another Interviewer asked about the project and made me draw the mechanism of the machine which I fabricated in my project.
          That was all about the Interview . The whole interview was about the training and final year project. I will suggest you all to get fully prepared to these two important aspects of our graduation.
------------------------------------------------------------------------------------------------------------------------

EIL Experience (29 MAY 2018) Mechanical


Q: Introduce yourself.
Q: Which city are you from? In which city was your college located?
Q: Why didn’t you get yourself placed? ( I told them I was in placement cell of my college) Q: Tell us about your project?
Q: Tell us about your training? What did you learn there?
Favorite Subjects: Thermodynamics, FM, SOM. 
Q: What are different types of flow?
Q: What are the different profiles of flow in a closed pipe? (Both laminar and turbulent)
Q: What is Surging and Choking in compressors?
Q: What are Non Destructive Techniques and name a few?
              The duration of interview was very short compared to others but I managed to give all the answers. Hoping for a good result !!
________________________________________________________________________
DATE : 28/05/2018

Name - Suraj Kumar 
AIR - 21
Date - 28/05/2018
The panel consists of five members out of which one is a lady HR
I had wish her but she didn't listen so while sitting she said me that there is a Mam also.I said I have wished Mam. She said Ok.
Chairperson- Tell me about yourself Suraj.
I introduced myself mentioned the project that I had done " Fabrication of Multipurpose Machine" .
They asked about the project ,process involved , equipment and tool used.
1.  Different welding techniques ( related to project).
Chairman : You have made a better machine, have you commercialise it ? About patent?
Favourite subjects ?
2.  I said Thermodynamics so one of them said you have done project on Production and your favourite subject is Thermodynamics ?
I said " I was working on fins of IC engine but due to lack of equipment in the college I had to swich the project".
3.  What is IC engine?
4.  HR questions like strength and weakness ?
5.  Why EIL ?
6.  What qualities should have for a job in EIL ? 
7.  About EIL.
Chairman was about to say thank you but last question was asked by one person How thermal stress is controlled ? I was explaining about the thermal stress and then he asked   " Area increase karne se thermal stress decrease hoga ? I said yes by mistake . 
I think I have answered wrong to the last question.
--------------------------------------------------------------------------------------------------------------------------

EIL INTERVIEW EXPERIENCE

AIR 46 ME
When I entered the room there were five people in the Panel
1. Asked me to Introduce myself.
2. Asked about my weakness and what I’m doing to overcome it ?
3. After that they asked some questions about my project.
4. Further they asked questions about my Industrial Training.
The interview was of 10 minutes only.
--------------------------------------------------------------------------------------------------------------------------

EIL INTERVIEW EXPERIENCE

1. Asked meaning of my name ?
2. Wrote favourite topics as IC engines and SOM. 
3. They asked me to explain why it is called internal combustion. 
4. Explain Otto and Diesel cycle.
5. Then asked about B.Tech Project.
6. Asked about bearings. 
         The panel was very friendly and supportive.


ONGC INTERVIEW EXPERIENCE 2018 (PRODUCTION)

ONGC AEE PRODUCTION : DATE : 01/06/2018

Panel head
1- Tell me where you belong from ?
2- Tell me about yourself (avoid schooling). 
3- Tell me about your projectand then some more questions from project
4- Your previous job assignments ?
5- Why you left your previous job ?
6- Why Public sector ? Why not private sector ?
7- Your gate score?
Member 2:
8- What is the role of production engineer in ONGC ?
9- 2nd Law of Thermodynamics ?
10- Difference between Centrifugal and Reciprocating Pump ?
Member 3 :
11- Arrangement to get high head and high flow rate ?
12- What is Latent heat ?
13- What is TIG welding ?
Member 4 :
14- What was your Industrial Training Findings ?
15- What was your Training Project ?
16- What is a Transformer ?
17- Is it a static or dynamic device ?
(I said I don't know Sir)
18- Is it having any rotating part ?
( I said no, then he asked it should be static then, I said may be)
Member 5 :
19- What are the two methods for Time Management
20- Define how to make record of the things help in Time Management ?

Production (Mechanical ) InterviewDate-1 June 2018AIR- 246 (857 score)

1. Naam kya hai ?
2. Introduce yourself  in brief.
3. What is your rank and gate score ?
4. You passed out in 2016 Why two year gap ?
5. Tell me about your project (4-5) question on project.
6. Tell me about Industrial Training. I did in IOCL Mathura so they asked (7 to 8 questions) related to different units and mechanical equipments . Specifically in
valves.
7. What do you know about ONGC ?
8. What is Cladding ? And applications of cladding in industry ?
9. What is CNG and LPG and it's Industrial Applications.
10. Types of Pumps and which type of pump is used for high head application ?
11. What is Annealing ?
12. What are the safety measures taken in IOCL refinery.
13. Agar iss room me aag lag jaye to kya hoga ? (  Smoke sensor lage hue the) and what will be your first step in this situation.
14. Why do you what to join ONGC ?
Total time is approximately 20 minutes and they asked questions in hindi only.

--------------------------------------------------------------------------------------------------------------------------

ONGC  AEE PRODUCTION  01/06/2018


1. Describe yourself ?
2 .Why you left your job ?
3. I m from Bokaro so questions were asked about Bokaro.
4. About Powder metallurgy ?
5 .Difference between PERT and CPM ?
6. Function of flywheel ?
7. How to increase the discharge in centrifugal pump ?
8. About Quality Control tools?
9. Last HR question was How will you manage the people?
Interview lasted for around 15 minutes.
--------------------------------------------------------------------------------------------------------------------------

ONGC Production Interview- 1st june

7 members- 1 lady, 6 gents
After greeting and sitting,
1. What is your name?
2. Your gate score?
3. Tell us about yourself ( leave schooling part).
4. Tell us about your jobs and what was your responsibility?
5. Why did u worked in startups?
6. You had experience of working in startups, you should have opened your own?
7. Why left and now coming to technical jobs?
8. Questions about projects- basics only
9. What is doping of fuel?
10. Tell us about CNG, LNG and LPG ? At what temperature they are kept?
11. One ton of refrigeration ?
12. How to increase discharge in centrifugal pump?
13. Ozone depletion?
14. What is semiconductor and how do you make it ?
15. What is supply chain management and how you relate with ONGC ?
16. How will your experience of job will help you in ONGC ?
17. Tell us about any crisis that you managed in job?
18. From which other PSU you have received calls?
Total time was around 18-20 mins.
--------------------------------------------------------------------------------------------------------------------------

ONGC Interview Experience AIR 65 (Production)

1. Tell us about yourself?
2. When I was talking about project in Q.1. They asked more about project and 2/3 questions on project.
3. What were you doing after 2016? Tell us specifically?
4. Role of production engineer? I said from extraction to supply then asked what are the equipments in between ? Tell us more.
5. About ONGC?
6. Reciprocating vs centrifugal pumps ?
7. Cavitation and effects?
8. Powder metallurgy and it's uses? Where in pumps powder metallurgy is used?
9. What is Poison ratio ? Steel vs Rubber ?
10. Stefan Boltzman Law and three modes of HT.
Panel was friendly and very supportive. 

--------------------------------------------------------------------------------------------------------------------------

30th May ONGC Interview (Production) 

As I entered the room,I wished all panel members and also the ma'am.

1- Asked about my native place and asked about the famous thing of the city.

2- Introduce yourself, told about my graduation and Industrial Training and B.Tech Project.

3- What was the purpose of your project and how it would be beneficial to  the society.

4- What is Oil Doping?

5- Which is the better tubes arrangement for heat exchanger ? Triangular or Rectangular? and Why?

6- What are the cooling methods used in the cooling of an IC engine cylinder?

7- What is MPFI?

8- What is the effect on the exhaust in MPFI? Asked also about the exhaust gases

9- Asked about the Industrial Training ,gave a brief information about the processes used in the turbine manufacturing.

10- Mam asked the last question : Why do you want to join ONGC.

Interview was around the 20 minutes, the panelists were very helpful .It was a nice experience.

----------------------------------------------------------------------------------------------------------------------

Air-21 Mechanical (Production)


1. Tell me about yourself?
2. What did you do in your college project?
3. Asked about solar cell ? (My project was based on solar energy)
4. Who is the petroleum minister?
5. OPEC?
6. Reciprocating pump if operated in series? Effects?
7. How to increase efficiency of centrifugal pump?
8. How ONGC works? Total Crude Oil and Natural Gas production last year?
9. What motivates you?
10. Asked few questions related to weakness?
The panel consisted of 6 members ( 1 lady and 5 gents). Very friendly and supportive.
--------------------------------------------------------------------------------------------------------------------------

ONGC Interview Experience (AEE PRODUCTION)

1. Introduce yourself ?
2. Why you have a gap? What you did in that years ?
3. In gap I did physical activity so they asked my BMI ?
4. What are your projects ?
5. One of my project is based on Aero-modeling so they asked me how aircraft works ?
6. What is reciprocating pump ?
7. What is centrifugal pump ?
8. What is the function of vessel used in suction side of reciprocating pump ?
9. What is difference between pump and compressor ?
10. What is turbine ?
11. In which sectors turbine are used ?
12. What do you mean by CSR ?
13. Price of crude oil ?
14. What is sustainable growth ?
15. What are conventional source of energy ?
_________________________________________________________________________

ONGC INTERVIEW EXPERIENCE ( AEE PRODUCTION ) 

Date -28.05.18

There was a brief presentation about the company followed by document verification and then interview.
We needed to carry xerox of original documents also (not mentioned in call letter).
Interview panel consisted of 6 members (1 lady).
After the greeting they asked me to sit down.
1. Tell me about yourself.
2. About summer training.
3. About final year project.
4. About ONGC.
5. What do we do?
6. Production previous year?
7. India's dependence on others for crude oil, OPEC.
8. My gate rank and marks
9. As my project was related to vibration,they asked about rotating unbalanced mass measurement and control.
10. Types of welding, TIG ,Difference between Soldering and Brazing.
11. As I am from Bihar, they asked me 1 good and 1 bad point about Bihar and about its perception.
12. Petroleum Minister ?
13. Current Finance Minister ?
All members were quite senior and very supporting, not much cross questioning.
I forgot Petroleum Minister's name and told Mahesh Pradhan and after 2 attempts I reached at Dharmendra Pradhan and they laughed !!

Overall interview was easy and they were not much into technical.


Will keep on adding more !!

NITIE INTERVIEW EXPERIENCE 2018

I am Jui Samant,  student from MADE EASY Pune batch.
Appeared for NITIE GD/PI 10:30 a.m. slot.

GD topic : God made land, man made boundaries.
2min preparation + 15 min discussion + 2 min conclusion.
Around 10-11 candidates were in one panel for GD. Everyone did get chance to speak.
PI : 
1. Introduce yourself.
2. What inspires you to be a part of NITIE/ what was your thought process for making this decision?
3. What are your extra curricular activities?
4. What was your B.tech project?
5. What is first law of thermodynamics?
6. What is entropy?
7. What can you say when entropy change of a system is positive?
___________________________________________

My AIR: 770 Interview date. 24/04/18.  Slot 10:30 am

GD topic: Is Donald Trump's presidency impact the world?
Timing : 14 mins
There were 13 members in GD ( as it was the last GD of this slot)
So it created a fish market.
Interview : panel consist of 3 members.
Timing: 8 mins
Introduce yourself?
What is additive manufacturing?
What is non conventional manufacturing process?
( As i have done NPTEL online certification in Manufacturing Process Technology)
Types of production systems?
Define your project?
Process used in your project?
How many Types of opening moves in chess?
Overall both GD & PI is good.
_________________________________________________________________________

NITIE INTERVIEW 24/04/18 (8:00 a.m.) Mechanical

GD topic : Will India ever be successful in swachh Bharat mission? 
Interview questions : 
1. Tell us about yourself? 
2. You are from Firozabad. What is it famous for ? 
3. What is the process of making bangles? 
4. What are different heat treatment processes ? 
5. What is the difference between hot working and cold working ? and what's their temperature range. 
6. Recent current issues about Uttar Pradesh. 
7. India performance in recent commonwealth game. 
8. What are differences between all those heat treatment processes (Annealing , Normalizing,      Hardening) ?                           
9. What is Industrial Engineering ?
10. What is conventional Thermal Powerplant  and Super Thermal Powerplant ? 
11. What is difference between productivity, efficiency, effectiveness and their formula ? 
12. What is pantograph mechanism ? And what mechanism is used in mini drafter ?
13. Did you apply for another institutes and why you are not joining them ? 
14. Why do you want to join NITIE ? 
15. Some current affairs questions on International India issue.?
_________________________________________________________________________

My name is Harshit Kumar Jaiswal GATE Rank 1243I had my GD and PI today at 10:30am slot on 24/04/2018 at NITIE.

First they asked us to sit in auditorium where we were shown introduction videos and then we were told to put our document in the asked order.
After that document verification procedure took more than 1 hour.
GD : My GD group was the last in 10:30am slot, so all the remaining students were put in my group. So the group comprised of 13 candidates. The topic of my group was very easy and general "Use of advertisement a waste of resources"
Total 2 min of time was given to gather our points and 17 min for discussion and 2 min for conclusion. I was third person to speak. In this way I was able to give 3-4 entries. Overall GD went Ok and no fish market was created. There was so much time that after 10 mins we were out of ideas. Almost everyone got a chance to speak. Although 2-3 students still didn't spoke.
PI : After GD we were made to go for PI. The volunteer escorting me told me not to panic as I was fortunate to have the most lenient interview panel of them all.
The panel comprised of three people, two male and one female ( According to the volunteer, their backgrounds were Manufacturing, Quality & HR, respectively). Almost every question to me was asked by one interviewer, who I think was from the manufacturing background. The question they asked were:
1. Tell us about yourself.
TOLD IN ABOUT 90 SECONDS
2. What was your final year project ?
TOLD IN ABOUT 90 SECONDS
3. (While reading my marksheet) Why have you scored so less in Industrial Automation?
ALMOST SPEECHLESS
4. I see that you have studied NDT in BTech. What is NDT?
TOLD IN SHORT TO THE POINT WITH ONE EXAMPLE
5. The subject NDT was of 100 marks and you are explaining so shortly with only one technique. Explain in detail and name 5 techniques.
EXPLAINED BUT ONLY 3 EXAMPLES
5. You have done extra curricular activities related to automobile, tell us what have you studied in the subject Automobile Engineering?
TOLD ABOUT ALL SECTIONS LIKE STEERING, BRAKING, ETC
6. Do you know any new technology in Transmission system?
TOLD THEM ABOUT CVTs CONSTRUCTION, WORKING AND USAGE.
7. Have you heard of ABS?
TOLD THEM ABOUT WORKING AND USAGE.
The interview was very short (just 10 mins) but I think it went well.